ā 489 ā
28 VOICE VLAN COMMANDS
This section describes commands used to configure the switch for VoIP
traffic by isolating the traffic on a dedicated VLAN, and setting the priority
used by each port to process this traffic.
VoIP traffic can be detected on switch ports by using the source MAC
address of packets to discover connected VoIP devices. When VoIP traffic is
detected on a configured port, the switch automatically assigns the port as
a tagged member the Voice VLAN. Alternatively, switch ports can be
manually configured.
voice vlan
configuration
This command displays the Voice VLAN configuration settings, the OUI
table, and port-related settings.
SYNTAX
voice vlan configuration
Table 59: Voice VLAN Commands
Command Function
voice vlan configuration Displays the Voice VLAN configuration settings, the OUI table, and
port-related settings
voice vlan discovery
protocol
Displays or sets the method for detecting VoIP traffic on a port
voice vlan mode Displays or sets the global Voice VLAN mode for the switch
voice vlan id Displays or sets the Voice VLAN ID
voice vlan agetime Displays or sets the Voice VLAN age time
voice vlan traffic class Displays or sets the priority for traffic carried by the Voice VLAN
voice vlan oui add Adds an entry to the OUI table
voice vlan oui delete Deletes an entry from the OUI table
voice vlan oui clear Deletes all entries from the OUI table
voice vlan oui lookup Searches for an entry in the OUI table
voice vlan port mode Displays or sets the Voice VLAN membership mode for specified
ports
voice vlan security Displays or sets the Voice VLAN security mode.
To Next Page
