C
HAPTER
4
| Configuring the Switch
Configuring Security
– 73 –
The default settings provide four access levels:
■
1 – Read access of port status and statistics.
■
5 – Read access of all system functions except for maintenance and
debugging
■
10 – read and write access of all system functions except for
maintenance and debugging
■
15 – read and write access of all system functions including
maintenance and debugging.
WEB INTERFACE
To configure privilege levels:
1. Click Configuration, Security, Switch, Privilege Levels.
2. Set the required privilege level for any software module or functional
group.
3. Click Save.
To Next Page
Loading...
