16.5 Playback of a Live Event
By connecting a Doremi MPEG Streamer to the DCP-2000 you can play a live event. You can
create a Show Playlist for the live event using theater effects such as closing and opening of
curtains, previews, trailers, and advertisements before the live event is scheduled to start. The live
event is not pre-recorded and therefore cannot be re-winded or fast forwarded. See Section 6.10
for more information on creating a live event.
16.5.1 How to Add a Live Event CPL
• Connect a Doremi MPEG Streamer to the DCP-2000.
• Go to the Editor tab in the CineLister GUI. You will see a reel icon that has “live” next to it.
• If you don't see the “live” icon, you might need to click the Refresh button. If it still doesn’t
appear, then this means the MPEG Streamer has not been added to the “Live Manager.”
See Section 6.10 for more information.
• Select “Doremi Live Streamer” from the elements window in the left pane.
• Click the “Add to Show Playlist” button. It will appear in the right pane.
• Go to the Playback tab and press the Play button.
16.5.2 How to Create and Play an SPL Using a Live Event CPL
• Follow the steps described above to add a Live Event CPL (Section 16.5.1).
• Select the desired elements for your SPL from the elements list in the left pane.
• You can select one or several elements to be added at the same time using the “Ctrl”
button.
• Click the “Add to Show Playlist” button. The elements will appear on the right pane.
• Make sure to click the Save button when finished creating the SPL.
• Enter the appropriate password from the pop-up window.
• Next, go to the Playback tab and click the Play button.
______________________________________________________________________________________
D2K.OM.001822.DRM Page 157 of 177 Version 1.5
Doremi Labs
To Next Page
Loading...
