16.7 Playback Alert Messages
CineLister displays alert messages in the Playback tab. Currently, there are two alerts available:
1 "Projector communication failure” (Figure 205).
2 "Storage is degraded" (Figure 206).
• “Projector Communication Failure”: This message is displayed when there is no projector
configured or if the server is not connected to the primary configured projector. See Section
6.6 to detect the possible reasons for this error.
• "Storage is degraded”: This message is displayed if at least one of the available RAID
storages is degraded or faulty. For example, RAID-md0 or RAID-md1.
Figure 205: “Projector Communication Failure” Alert
______________________________________________________________________________________
D2K.OM.001822.DRM Page 160 of 177 Version 1.5
Doremi Labs
“Projector
Communication
Failure” alert
Message
To Next Page
Loading...
