Doremi DCP-2000 - Playback Recovery Due to Power Failure; How to Recover Playback

17.3 Playback Recovery Due to Power Failure
• If a power failure occurs during a scheduled playback, then playback recovery will be
possible after having powered the unit back on.
17.3.1 How to Recover Playback
• When powering the unit back on after an unexpected power failure, you will get an “Invalid
Shutdown” message (Figure 214).
• Click Ok, and CineLister will automatically launch.
• You will be prompted to a “Information Recovery” window (Figure 215).
• Click Ok and CineLister will resume playback three minutes before the power failure
occurred.
Figure 214: Warning Window - Invalid Shutdown
Figure 215: Information Recovery Window
______________________________________________________________________________________
D2K.OM.001822.DRM Page 166 of 177 Version 1.5
Doremi Labs