Figure 39: Automatically Updated Server
• The "Identifier" field identifies the server and can be renamed for the user's convenience.
• The "Ingest Protocol" field allows the user to select the transfer protocol. Currently, only
FTP is supported.
• Once the server is selected, the IP field will automatically be populated.
• You can click on the "Test" button to determine if the unit is available in the network once it
has been selected.
• Username and Password fields are for security purposes.
• The "Remote Path" field is for the destination of the server. It is not needed when using the
"Scan for Server" method.
• Click on the Save button to save this configuration for the Content Feed Manager. The unit
is now confirmed as an ingest source for our destination unit.
______________________________________________________________________________________
D2K.OM.001822.DRM Page 37 of 177 Version 1.5
Doremi Labs
Advanced
Options
Button
Add
Button
Browse
Button
To Next Page
Loading...
