dSPACE DS1103 User Manual

Setting Up an Ethernet Connection
Between PC and Expansion Box
81
Setting Up The Ethernet Connection.......................................... .... 82
Preparing the TCP/IP Configuration............................................ 84
How to Set up the TCP/IP Protocol......................................... 84
Setting Up a Peer-to-Peer Connection ....................................... 85
How to Set Up a Peer-to-Peer Connection............................. 85
Integrating the Expansion Box into a Network............................ 87
How to Change the IP Address of the Expansion Box............. 88
How to Restore the TCP/IP Configuration of the PC............... 89
How to Connect the Expansion Box to the Network and
Test the Connection.............................................................. 90
Connecting External Devices to the dSPACE
System
93
How to Connect External Devices to a Board......................... 93
How to Connect External Devices to a Connector Panel......... 95
Uninstalling the System
97
Removing the Hardware................................................................. 98
How to Remove the Hardware from the Host PC................... 98
How to Remove Hardware from an Expansion Box.............. 100
Connector Pinouts and LEDs
103
DS1103 Components................................................................... 104
Board Overview................................................................... 105
Analog Connector (P1)........................................................ 107
Digital Connector (P2)......................................................... 112
Incremental Encoder/Digital Connector (P3)......................... 117
Slave DSP Debug Connector (P6)......................................... 123
Slave DSP Flash Jumper (J1)................................................. 123
Status LEDs of the DS1103.................................................. 124
CP1103/CLP1103 Components.................................................... 127
Panel Overview.................................................................... 127
CLP1103 LED Assignment.................................................... 128
BNC Connectors (CP1 ... CP28)............................................ 129
Slave ADC Connector (CP29)............................................... 130
s
Contents
t
DS1103 Hardware Installation and Configuration November 2014
5
t

dSPACE DS1103 Specifications

General

Brand	dSPACE
Model	DS1103
Category	Controller
Language	English