Programming
382 Service Instructions 755 A/756 A - 00.0 - 02/2019
Testing step motor
 The display switches to Test step motor.
Fig. 349: Test step motor
To test the step motor:
1. Press the button.
 Reference run is carried out.
CAUTION
Risk of injury from moving parts!
Crushing possible.
When you advance the transport clamp, the
transport clamp will start at the set speed.
Do NOT reach into the movement area of the
transport clamp.
Do not place any objects in the movement area of
the transport clamp.
To Next Page
Loading...
Need help?
General
