❏ Scan to Email
❏ Scan to Folder
❏ Scan to Document Capture Pro
❏ Fax to Email
❏ Fax to Folder
Follow the steps below to select the network to use these scan and fax functions.
1.
Select Settings on the home screen.
2.
Select General Settings > Network Settings > Network Transmission Route.
3.
Select Standard or Additional for the network to use the scan and fax functions.
Selecting a Network that has an LDAP Server (When Using an Additional
Network)
You can use the LDAP server on either the standard or additional network.
Follow the steps below to select the network that has the LDAP server you want to use.
1.
Select Settings on the home screen.
2.
Select General Settings > Network Settings > LDAP Server.
3.
Select Standard or Additional for the network that has the LDAP server.
Receiving Email Notications When Events Occur (When Using an Additional
Network)
About Email
Notications
(When Using an Additional Network)
is
is the
notication
function that, when events such as printing stop and printer error occur, send the email to
the
specied
address.
You can register up to ve destinations and set the notication settings for each destination.
To use this function, you need to set up the mail server before setting up notications. Set up the email server on
the network (standard or additional) to which you want to send the email.
Related Information
& “Conguring a Mail Server” on page 483
Conguring Email Notication (When Using an Additional Network)
Congure email notication by using Web Cong from a computer on the standard network.
1.
Enter the printer's IP address for the standard network into a browser to access Web Cong.
Using Optional Items
>
10/100/1000 Base-T,Ethernet
>
Settings when Using an Additional Network
386
To Next Page
Loading...
Need help?
General
