144 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
The left side of the viewer is the universe grid. It displays 512 address cells. Cells outlined in a
color are currently patched addresses. Each patched cell contains an address number and
output value. Unpatched cells are black and only have an address level.
Output values are 0 through 255. 0 is displayed in black and 255 is in bright red. The red
output value color will grow brighter as the output value increases.
If there is a channel or address selection on the command line, the appropriate address cell will
be outlined in gold. You can also press on a cell to select it but it will not post to the command
line. Information about the selected address will display to the right of the grid.
Any available sACN sources will be displayed in the right panel, and are color coded. The
address cells will use that same color coding to indicate the device it is patched to.
Configuration Options
When the Follow Command Line box is checked, the viewer will follow the command line for
selecting addresses. This is enabled by default.
Press {About} to open the About Address display in the CIA.
Press the left and right arrows to scroll through the available universes, or enter a specific
universe number in the box.
To Next Page
Loading...
Need help?
General
