352 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
Note:
Capture Latch works on a user by user basis.
Using Query
[Query] is used to select channels that meet criteria specified by you. These selections are
conditional, based on what type of fixture a channel is or what that channel is doing, isn't
doing, can do or cannot do. These criteria are established in the command line using the
softkeys, the keypad, and the direct selects.
Query Softkeys
When [Query] is used, the following softkey conditions are available:
Is In
Isn’t In
Can Be
Can’t Be
Or
Moves Only
Unpatched
Mark (cue where the intensity is active)
Less Than (includes equal to)
Greater Than (includes equal to)
Broken Mark
Marking (future cue)
Track
Up Moves
Down Moves
Live Moves
Dark Moves
Autoblock
Block
Assert
Part
Park
Time
Delay
Capture
Note:
Unless otherwise specified, Eos assumes that a query will apply to current
output. Therefore use of the {Is In} softkey is optional.
The CIA also repaints to display all of the available softkeys by which you can search. These
can be used in defining your query criteria.
To Next Page
