Magic Sheets 469
Interactive
This checkbox toggles whether or not the object is interactive. Interactive objects can be
selected in the same way as a direct select or virtual fader. Objects set to not-interactive
cannot be selected, and will only display information.This checkbox is unavailable for any
inherently non-interactive objects (such as a command line).
Position
Shows the position of the object on the magic sheet. Position can be manually entered here.
Size
Shows the size of the object. Size can be manually entered here.
Rotation
Shows the rotation of the object. Rotation can be manually entered here.
Items
Refers to the number of objects selected for editing. Multiple objects can be edited at the
same time.
Editing Objects on the Magic Sheet
In addition to using the editing tools, objects can be manipulated on the magic sheet using a
touchscreen or a mouse. For selection methods for multiple objects, see
Navigating a Magic
Sheet (on page455)
.
The blue handles are used to resize objects without keeping the object's aspect ratio.
The green handles are used to resize an object while preserving the aspect ratio.
The white handles are used to rotate the object.
Limited Expand Mode
Limited Expand Mode allows for a magic sheet to be viewed fullscreen. To enter into this
mode, you can either select it from the magic sheet display tools (
Display Tools (on page454)
)
or you can use [Shift] & [Displays]. [Shift] & [Displays] is also used for exiting this mode.
To Next Page
Loading...
Need help?
General
