10 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
LTP
LTP is applicable to any parameter of any channel. LTP output is based on the most recent
move instruction issued to the channel parameter. Any new values sent to the channel will
supersede any previous values, regardless of the level supplied.
Eos family consoles determine the LTP value for a channel, which is overridden by any HTP
input values that are higher than the LTP instruction. This is then finally modified by manual
control.
To Next Page
Loading...
