420 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
About [About]
[About] provides detailed information regarding selected elements.
Pressing [About] puts the console in about mode, which allows you to examine about
information indefinitely, simply by selecting the element you are interested in. When opened,
it appears in the CIA and remains open until closed or until another action forces it to close.
You can also open an About display in a tab by using [Tab] [2][9].
Press the Link icon to break the link to the command line for the current About display. When
the link is broken, the About display will be forced to keep showing the type of information
currently being displayed, such as channel, address, or presets. When linked, the About
display will be linked to the command line, and will updated based on which target is selected.
Press {.a[A]} to zoom. There are three zoom sizes: small, medium, & large. Medium is the
default size.
When in about mode, selecting a channel will reveal information about that channel. Below
are examples of the Current Values view (see below) of information that is presented when
selecting conventional or automated fixtures. For more information about the About Channel
display, see
[About] Channel (on page422)
[About]
When [About] is pressed when the command line is clear, the CIA presents the following
information:
System address count
Software version
Fixture library version
Copyright notifications
Device name
Assigned as (Primary/Backup/Client/Offline)
User ID
Priority (ACN and Net2)
IP Address(es)
Number of defined parameters
Number of patched addresses
To Next Page
Loading...
