ETC Element 2 - Page 490

476 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
•
Focus Wand - using aRFR/iRFR to perform click-to-focus.
•
FPE - Fixture Position Estimation. Estimates the physical locations of fixtures based on
fixture profile information and user-provided focus palettes.
•
Origin - a known location in your space, represented as the intersection of the XYZaxes
(0,0,0), that acts as a reference point for the measurements of the rest of your
Augment3d model.
•
Pan / Tilt Kinematics - an aspect of a fixture profile that turns DMXvalues into a
direction the beam is pointing.
•
Model - the Augment3d virtual 3Dspace.
•
XYZProgramming - telling the console to aim a fixture's beam through a particular
point in virtual space.