To Next Page

To Previous Page

560 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual

Console Port 1 Port 2 Port 3 Port 4

Gio 10.101.91.101 192.168.91.101

Gio @ 5 10.101.98.101 192.168.98.101

Ion Xe 10.101.100.20 192.168.100.20

Ion Xe 20 10.101.100.30 192.168.100.30

Ion Xe RPU 10.101.96.201 192.168.96.201

Element 2 10.101.99.101 192.168.99.101

ETCPuck 10.101.185.101 192.168.185.101

RPU3 10.101.93.101 192.168.93.101

RVI3 10.101.86.101 192.168.86.101

Ion Classic 10.101.100.101

Ion RPU 10.101.96.101

Element Classic 10.101.97.101

Eos Classic 10.101.90.101

Eos Classic RPU 10.101.95.101

RVI 10.101.85.101

If "Obtain an IPAutomatically"is enabled, this field will display the IP address that is being

used by the console (whether it is served via DHCP or a self-generated link-local IP address).

Subnet Mask

If "Obtain an IPAutomatically"is disabled, you set the subnet mask here. This is a static

setting and will remain set until changed by a user. The default subnet mask is 255.255.0.0.

If "Obtain an IPAutomatically"is enabled, this field will display the subnet mask that is being

used by the console (whether it is served via DHCP or a self-generated link-local IP address).

Gateway

If "Obtain an IPAutomatically"is disabled, you set the gateway IP address here. This is a static

gateway IP address and will remain set until changed by a user.

Eos consoles controlling a Net2 system should use the static IP address as the default gateway.

All other consoles should default to 10.101.1.1.

If "Obtain an IPAutomatically"is enabled, this field will display the gateway IP address that is

being used by the console (whether it is served via DHCP or a self-generated link-local IP

address).

Physical Address

The physical address is the MAC address. This address is a unique identifier and cannot be

modified.

Network Interface Delay

Note:

This option is not available on ETCnomad.

When {Required} is enabled, the console will wait for the network connection to be fully

initialized before launching the Eos application.

ETC Element 2 User Manual

Other manuals for ETC Element 2