ETC Element 2 - Page 638

624 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
OSC Method Arguments Examples/Comments
<parameter>/dmx
parameter dmx
level
/eos/group/<number>/param/
<parameter 1>/<parameter
2>/.../ dmx
number(s) for dmx
parameter levels
/eos/group/1/param/pan/tilt/dmx=255
OSCMacro
Selects and fires (executes) macros.
OSC Method Arguments Examples/Comments
/eos/macro number for macro to select /eos/macro=1
/eos/macro/fire number for macro to run /eos/macro/fire=1
/eos/macro/<number>/fire
number for button edge:
1.0=down, 0.0=up (optional)
/eos/macro/1/fire=1.0
OSCSubmaster
OSC Method Arguments Examples/Comments
Select Submaster
/eos/sub number for sub to select /eos/sub=1
Control Submaster
/eos/sub/<number>
floating point number to set sub
percent to
/eos/sub/1=0.75 (useful for
mapping to an
OSC slider)
/eos/sub/<number>/out
number for button edge:
1.0=down, 0.0=up (optional)
/eos/sub/1/out
/eos/sub/<number>/home
number for button edge:
1.0=down, 0.0=up (optional)
/eos/sub/home
/eos/sub/<number>/level
number for button edge:
1.0=down, 0.0=up (optional)
/eos/sub/1/level
/eos/sub/<number>/full
number for button edge:
1.0=down, 0.0=up (optional)
/eos/sub/1/full
/eos/sub/<number>/min
number for button edge:
1.0=down, 0.0=up (optional)
/eos/sub/1/min
/eos/sub/<number>/max
number for button edge:
1.0=down, 0.0=up (optional)
/eos/sub/max
/eos/sub/fire number for sub to bump /eos/sub/fire=1
/eos/sub/<number>/fire
number for button edge:
1.0=down, 0.0=up (optional)
/eos/sub/1/fire=1.0 (bump
sub 1 on)
/eos/sub/1/fire=0.0 (bump
sub 1 off)
OSCPreset
OSC Method Arguments Examples/Comments
Select Preset
/eos/preset number of preset to select /eos/preset=1
Recall Preset