ETC Element 2 - Page 645

Show Control 631
OSCActive Channels and Parameters
OSCMethod Arguments/Comments
/eos/out/active/chan
String argument with active channels and current value from the
1st channel
/eos/out/active/wheel/<number>
String argument with parameter name and current value from
the 1st channel: 0=Null/Unassigned, 1=Intensity, 2=Focus,
3=Color, 4=Image, 5=Form, 6=Shutter
Note: This allows you to create a ML Controls style interface via OSC. For example,
on the OSC-enabled device, setup 10 wheels (/eos/active/wheel/<1-10>) with
matching labels. If using in conjunction with “/eos/active/switch/<number>”, you
should still use “/ eos/out/active/wheel/<number>” to display feedback for that
switch.
OSCActive Cue
Note: Updated once per second.
OSCMethod Arguments/Comments
/eos/out/active/cue/<cue list
number>/<cue number>
Float argument with percent complete (0.0-1.0)
eos/out/active/cue Float argument with percent complete (0.0-1.0)
/eos/out/active/cue/text
String argument with descriptive text about the active cue,
ex: “1/ 2.3 Label 0:05 75%"
/eos/out/pending/cue/<cue list
number>/<cue number>
/eos/out/pending/cue/text
String argument with descriptive text about the pending
cue, ex: “1/2.4 Label 0:30"
OSC Direct Select Banks
OSCMethod Arguments/Comments
/eos/out/ds/<index>
String argument with descriptive text for the OSC direct select at
<index>: target name, page number, and mode
/eos/out/ds/<index>/<button
index>
String argument with button label for OSC direct select at <index>
for button <button index>
OSC Fader Banks
OSCMethod Arguments/Comments
/eos/out/fader/<index>
String argument with descriptive text for the OSC fader bank at
<index>
/eos/out/fader/<index>/<fader
index>/name
String argument with fader label for OSC fader bank at <index>
for fader <fader index>
/eos/fader/<index>/<fader
index>
Floating point number for fader percent: 0.0-1.0
Note: Eos will delay sending fader levels for faders that have been moved via OSC
commands for 3 seconds. If you move a fader on an OSC remote control, Eos will send
the actual fader level 3 seconds later.