80 Eos Apex, Eos Ti, Gio, Gio @5, Ion Xe, Ion Xe 20, and Element 2 User Manual
Note:
You can go straight to the welcome screen by adjusting a setting in the ECU.
See Open in "Shell" E.C.U. (on page554) in the ECU appendix.
Power Down the Console
1. After saving your show (see
Saving the Current Show File (on page153)
), in the browser
menu select Power Off Device. A dialogue box opens asking you to confirm.
2. Confirm this command by pressing {OK} in the dialog box. The console will power down.
Note:
These are persistent storage systems. Therefore if you shut down your system
without saving the show file, you will return to the same place in your show when you
reboot.
Note:
The console will display an improper shutdown message on the next power
up if the console was not powered down from the browser menu or welcome screen.
The Central Information Area (CIA)
The Central Information Area (CIA) is the lower portion of the screen. By default, the CIA
consists of three primary areas: the command line, the parameter display, and the browser.
Softkeys are also contained within the CIA.
Note:
Gio and Gio @ 5 have a mini encoder display as part of their CIA. See Mini
Encoder Display (on page124) for more information.
CIAIcons
There are three icons located above the CIA.
Favorite CIA Display
You can select a favorite default display for the CIA that will show when [Displays] is pressed.
The standard default display for the CIA is the Browser.
The favorite display will show a gold star icon at the top of the CIA by the arrow and lock
icons. Displays that can be selected as a favorite, but are currently not, will show a gray star at
the top of the CIA. Click on the gray star to make that display your favorite. That display will
now be the new default display for the CIA. Displays that show up in the CIA but cannot be
the default display will not show the star icon.
To Next Page
Loading...
Need help?
General
