3GS Technical Manual
Issue 05 April 2005
Programming Menus 8-18
Zone Types and assignable Attributes
Key to Symbols and text used:
Attributes
Zone
Types
Inhibit
S U
Exit
S U
Access
S U
Push
S U
Fire- X
S U
XShunt
S U
XTamper
S U
Panic
S U
Day-PA
S U
KeyArm
S U
24 HR
S U
Set
S U
Unset
Local
S U
Double
Knock
S U
Fire
S U
AREA ✔ ✔ ✔ ✔ ✔ ✔ ❆ ✔
✔ ✔
✕ ✔ ✕ ✔ ✔ ✔ ❆ ✔ ✔ ✔ ✔ ✔ ✕ ✔ ✕ ✔ ✔ ❆ ✔ ✔
FTC ✔ ✔
COMMON ✔ ✔ ✔ ✔ ✔ ✔ ❆ ✔
✔ ✔
✕ ✔ ✕ ✔ ✔ ✔ ❆ ✔ ✔ ✔ ✔ ✔ ✕ ✔ ✕ ✔ ✔ ❆ ✔ ✔
PART ✔ ✔ ✔ ✔
✔ ✔
✔ ❆
HALF ✔ ✔ ✔ ✕ ✔ ❆
FULL ✔ ✔ ✔ ✕ ✔ ❆ ✔ ❆ ✔ ❆ ✔ ❆ ✔ ❆ ✕ ❆ ✔ ❆ ✔ ❆
LIE ✔ ✔
ALARM ✔ ✔ ✔ ✔ ✔ ✔ ❆ ✔ ✔ ✔ ✕ ✔ ✕ ✔ ✔ ✔ ❆ ✔ ✔ ✔ ✔ ✔ ✕ ✔ ✔ ❆ ✔ ✔
FIRE ✔ ✔
CABINET ✔ ✔
RESET ✔ ✔
TECH ✔ ✔
SPARE
LOG
S
System Set in relevant mode ✔ Active in this mode and will operate as stated in Zone Attributes table
U
System/Area Unset ✕ Not Active in this state and will not cause an Alarm activation
This attribute cannot be assigned to this Zone type ❆ This attribute is not useable in this mode and may cause an Alarm
activation or cause system to fail to set etc.