Issue 4.5 Aug 2005 PC Software 16 - 7
INSTALLING THE DONGLE
Installing the Dongle HASP Device Driver
The coded dongle must be placed in LPT1 of the PC, and a HASP Device Driver installed from the CD.
Run or double-click on the HDD32.EXE file in the \ 3GS+Dongle directory of the CD. This will install the HASP
device driver to your PC.
Or
From the HTML start up page click on “Install Dongle Driver”
Note The Hasp Driver MUST be installed to run 3GS+ in non demo mode
To Next Page
Loading...
