Europlex 3GS - Radio PA Assign

To Next Page

To Previous Page

3GS Technical Manual

Issue 4.5 August 2005

Programming Menus 8-87

RADIO PA ASSIGN - RPAS

Function: This menu allows you to put an RPA unit on the system.

Additional Information

Each Radio PA (RPA) unit is encrypted with a unique ten digit serial number. The 3GS Controller uses this serial number to

identify the RPA. In order for the system to recognise individual units, it is necessary to assign an RPA NUMBER to each unit

from 1 to 126. This is achieved by selecting the RPAS option and pressing any RPA button. The RPAs serial number is displayed

along with an RPA number. RPA numbers may be reassigned if required.

Europlex 3GS - Radio PA Assign - Rpas