3GS Technical Manual
Issue 4.5 August 2005
Programming Menus 8-89
RADIO PA ASSIGN - OPTIONS
Function: This menu allows you to setup RPA options for each unit.
Additional Information
There are currently six programmable options which provide an arrangement of uses for the RPA buttons. Individual buttons (or
a combination of buttons) can be assigned an option within the Radio PA Set Up menu, provided it is granted to the RPA unit
within the Options menu first. For example, on RPA units, if the left button is required to activate a Delayed Raid option and the
right button is to activate Raid Cancel, both of these options must be granted to the individual RPA unit concerned. By default,
RPA’s are assigned no options and therefore failure to assign options as described means the units will not operate. As up to 7
different button configurations may be obtained by pressing the buttons singularly and as combinations, all seven options may
be assigned to each RPA unit. Details of these options are given overleaf.
To Next Page
Loading...
