3GS Technical Manual
Issue 4.5 August 2005
8-28 Programming Menus
NODE CONFIGURE - NODES - INFORMATION - MONITOR
Function: The Monitor option allows you to monitor a node’s current operational status. The data is displayed in real time. For
example, if you activate a tamper switch of the monitored node, the Lid Tamper message displays to reflect this.
Scroll through the online nodes by pressing the UNSET or PART keys. Note that the 3GS Controller board may be monitored by
selecting node 0. Press NO at any stage to exit the menu.
menu
To Next Page
Loading...
