DMP 128 FlexPlus • Configuration Tools 89
5. After clicking the Download link, select Run from the next page to run the firmware
installer (see figure 147,
5
below). Alternatively, select Save (
6
) to save the firmware
installer and install the firmware at a later time.
Figure 147. Firmware Installer Run or Save
6. Once the installer has been run, the Firmware Upgrade dialog box opens, click Next
to begin the installation process (see figure 148,
6
below).
Figure 148. Firmware Upgrade InstallShield
7. The terms of installation must be agreed to. Select the I accept... radio button (see
figure 149,
7
on the next page).
8. Click Next (
8
).
figure 137. Firmware Installer Run or Save
figure 138. Firmware InstallShield
To Next Page
Loading...