DMP 128 FlexPlus • Remote Control and Configuration 129
Command and Response Table Sections
Command and Response Table for Basic SIS Commands
Command ASCII command
(host to device)
Response
(device to host)
Additional description
Information requests
General information
I
VnnXnn
•A04x08•
E48x24]
Example:
V00X00 A04X08
E48x24
Model name
1I
DMP 128 FlexPlus
]
Response varies
depending on model.
Model description
2I Digital audio
matrix processor
]
Response will vary
depending on model.
System memory usage
3I <number> Bytes Used
out of <number>
KBytes
]
User memory usage
4I <number> Bytes Used
out of <number>
KBytes
]
Query firmware version
Q
{version x.xx}
]
Query firmware version
with build
*Q
{version x.xx.xxxx)
]
Query kernel/library
version
**Q
{version x.xx.xxxxLX)
]
Query firmware version
(advanced)
X4% Q {specific version info}] See X4% below.
Query part number
N
zz-zzzz-zz
]
Ethernet Data Port
Set current connected
port timeout
E0* X2^TC} Pti0*X2^]
View current connected
port timeout
E 0TC} X2^]
Set global IP port
timeout
E1*X2^TC} Pti1*X2^]
View global IP port
timeout
E1TC} X2^]
KEY:
X2^
= IP Timeout The number of seconds before timeout on IP connections (min=1,
max= 65000 and default = 30 (300 seconds)
X4%
= Firmware Query
0 = Detailed version information (includes all 2Q, 3Q, and 4Q)
1 = Firmware version
2 = Final stage bootloader
3 = Factory base code version
4 = Updated firmware version