FARO Edge
September 2012
133
Chapter 7: Software
Sphere: Best Fit
From the MAIN menu, touch CONSTRUCT > FEATURES > SPHERE > BEST
FIT. Use this command to construct a best fit sphere using a minimum of four
point-reducible features.
1 Choose a minimum of four point-reducible features. Choose a selected feature
to remove it from the selection group.
2 Touch OK
3 Touch the L
ABEL field to change the feature name. Touch the NOMINALS
icon to enter nominal values. See “Nominals” on page 143.
See “Best Fit Sphere” on page 168..
08M52E00_FaroArm_Edge.book Page 133 Thursday, October 4, 2012 9:31 AM
To Next Page
Loading...
