Faro Edge - Probe Case; Optional Accessories

FARO Edge
September 2012
15
Chapter 2: Setup
Probe Case
Optional Accessories
The Accessories Manual that is on your Edge Manual CD lists all of the optional
accessories that you can order from FARO. Installation and detailed operational
instructions are included.
The Accessories Manual is also available on FARO’s Web site at www.faro.com.
To purchase optional accessories, contact FARO’s Customer Service by Phone,
Fax or E-Mail. See “Technical Support” on page 191.
 Probe Kit Case
 Probe, 6mm Ball
 Probe, 3mm Ball
 12mm wrench
 Compensation Cone
 Probe Kit Case
 i-Probe, 6mm Ball
 i-Probe 3mm Ball
 TP-20 Adapter
 Probe Torque Wrench
 12mm wrench
 Compensation Sphere
 Compensation Cone
Figure 2-2 Edge Standard Probe case Figure 2-3 Edge i-Probe case













08M52E00_FaroArm_Edge.book Page 15 Thursday, October 4, 2012 9:31 AM