Faro Edge User Manual

FARO Edge
September 2012
148
Chapter 7: Software
2 Touch a File.
3 Touch another location:
• Local
•SD RAM Card
•USB Drive
•Trash Can
4 Touch the BACK button to return to the FILES menu, or the HOME button to
return to the MAIN menu.
N
OTE: You should use this command often to backup or copy your Macro, Part
Data, and Report files to a SD RAM Card or USB Drive.
Load Parts
Use this command to load a Part file. You can then look at the part data using the
Review Features command. See “Review Features” on page 143.
1 Touch the location:
• Local
•SD RAM Card
•USB Drive
2 Touch a File.
3 Touch the BACK button to return to the FILES menu, or the HOME button to
return to the MAIN menu.
Save Parts
Use this command to save part data to a Part Data (*.Data) file. This data is
always in the Edge coordinate system. Use the SAVE REPORT command to
save the part data in a simple text file for printing. See “Save Report” on
page 149.
1 Enter the part name.
2 Enter the part serial number.
3 Touch the location:
• Local
•SD RAM Card
•USB Drive
N
OTE: Touch the other location buttons to quickly save the Part Data files to
multiple locations.
08M52E00_FaroArm_Edge.book Page 148 Thursday, October 4, 2012 9:31 AM

Faro Edge Specifications

General

Brand	Faro
Model	Edge
Category	Measuring Instruments
Language	English