Faro Edge - View Log

FARO Edge
September 2012
175
Chapter 9: Configuring the FARO Edge in CAM2 Q
• Distance Interval: press the FRONT button, or the G key, to start the
distance interval. Collect a single reading when the probe moves a distance.
Choose this option, enter the distance value and press OK.
• Time Interval: press the FRONT button, or the G key, to start the time
interval. Collect a single reading over time. Choose this option, enter the
time value and press OK.
08M52E00_FaroArm_Edge.book Page 175 Thursday, October 4, 2012 9:31 AM