T R O U B L E S H O O T I N G C H A P T E R 1 1
Possible Software Causes:
1. Sound Card issues. Make sure to use a supported sound card as listed on the FlexRadio website
(specifications page). These are the only cards we guarantee will work with the radio (others may
work, but we can not support them). Make sure that general Windows sounds can be heard through
the speakers. Power down the radio first. Then open up the Control Panel (Start ā Settings ā
Control Panel). Select Sounds and Audio Devices.
Figure 167: Sounds and Audio Devices ā Audio
Select the Audio Tab and temporarily set the default playback and recording device to the sound
card attached to the radio (note settings before changing so that you can return to these settings
when finished testing). Then click the Sounds Tab.
[The rest of this page has been left blank intentionally]
174 ļFlexRadio Systems
To Next Page
Loading...
Need help?
General
