Fuji Xerox DocuCentre SC2022

7 Faxing (Optional)
165
4. Tap > [Delay Send] > [Specific Time].
5. Specify the start time, and then tap [OK].
6. Configure the other fax settings as needed.
Refer
• For details about the settings, see "Configuring the Detailed Settings (P.173)."
7. Tap .
8. Enter the fax number for the recipient.
Note
• Pressing recalls the last dialed fax number.
• You can also use the address book or an LDAP server to specify the fax number. For details, see "Using the Address Book
(P.279)."
9. Tap [Send].
Note
• If the message about the next document is displayed, follow the on-screen instructions to finish scanning.
Checking the Outgoing Fax
You can check the scanned data before sending the fax. On the detailed setting screen, display the check mark
for [Preview], and then tap [Preview] on the upper right corner. When a document is scanned, the Preview screen
for the document is displayed.
Refer
• For details about the [Preview] setting, see "Configuring the Detailed Settings (P.173)."
 Preview Screen
You can perform the following operations.
[Scan Another Page]
Displayed when the document is placed on the document glass. Tap to scan the next document.
Switches the page to be displayed.