User Guide
202
Setting Up Wi-Fi Direct
To use Wi-Fi Direct, you need to first configure the Wi-Fi Direct settings from the operator panel of the machine.
When you select the SSID of the machine on the display of the mobile device and then enter the specified
passphrase, the mobile device will be connected to the machine via Wi-Fi Direct.
Setting Up the Machine
• You can also use CentreWare Internet Services to specify the machine. For details, see the CentreWare Internet Services
Help.
• Wi-Fi Direct cannot be used in an IPv6 or Ad-hoc environment.
1.
Press the <Home> button.
2.
Tap [D evic e].
3.
Tap [Network Settings] > [Wi-Fi Direct].
4.
Tap for [Wi-Fi Direct] to display the check mark.
5.
Turn off the machine, and then turn it on again.
To Next Page
Loading...
