10 Changing the Machine Settings
219
[2-Sided Printing] [Off]
*
, [On]
[Remote Receive] [Off]
*
[On] [Remote Receive
To ne ]
[Auto Reduction] [Off (Split Image)]
*
, [Off (Crop to Fit)],
[On]
[Outgoing Fax
Settings]
[Auto Redial
Setup]
[Number of
Redials]
[3]
*
[Redial Interval] [1]
*
[Interval Timer] [8]
*
[Dial Type] [PB]
*
, [DP (10pps)], [DP (20pps)]
[Prefix Dial] [Off]
*
, [On]
[Cover Sheet] [Off]
*
, [On]
[Send Header] [Off], [On]
*
[ECM] [Off], [On]
*
[Modem Speed] [2.4 Kbps], [4.8 Kbps], [9.6 Kbps], [14.4
Kbps], [33.6 Kbps]
*
[Display Manual
Fax Recipient]
[Off], [On]
*
[Fax Reports] [Fax Activity] [Auto Print]
*
, [Manual Print]
[Fax Transmit] [Print Always], [Print On Error]
*
, [Print
Disabled]
[Fax Broadcast] [Print Always]
*
, [Print On Error], [Print
Disabled]
[Protocol Monitor] [Print Always], [Print On Error], [Print
Disabled]
*
[Email Settings] [Max Email Size] [2048]
*
[Network
Settings] (P.243)
[Wi-Fi] [Wi-Fi Setup
Wizard]
[Enter SSID] [Infrastructure] [No Encryption]
*
,
[Mixed mode PSK],
[WPA2-PSK-AES],
[WEP]
[Ad hoc] [No Encryption],
[WEP]
[WPS] [Connect via PIN]
[IP Mode] [Dual Stack]
*
, [IPv4], [IPv6]
[TCP/IP] [IP Addressing] [DHCP/AutoIP]
*
, [BOOTP], [RARP],
[DHCP], [Manual Input]
[IP Address]
[Subnet Mask]
[Gateway Address]
[Disable IPsec]
[Reset Wi-Fi Settings]