10 Changing the Machine Settings
241
*3
Requires registering e-mail addresses of the destinations. For details, see the CentreWare Internet Services Help.
*4
Requires file server settings. For details, see the CentreWare Internet Services Help.
[Receive Size]
Specify the maximum size of paper for printing received faxes.
[2-Sided Printing]
Specify whether to print the received faxes on both sides of a sheet of paper.
• This feature may not be available depending on the size of the received faxes or settings of the trays, etc.
[Remote Receive]
Specify whether to enable receiving a fax by operating the external telephone connected to the machine. To use
this feature, you need to select [On], and then specify a two-digit code on [Remote Receive Tone]. You can
receive a fax by entering a remote receive code specified on [Remote Receive Tone] on the external telephone.
[Auto Reduction]
Sets the operation when the length of a received fax document exceeds the length of paper to be printed.
[Outgoing Fax Settings]
Configure the settings for sending faxes.
[Auto Redial Setup]
Specify the settings for automatic redial.
[Number of Redials]
Specify the number of redial attempts. If you enter 0, the machine does not redial.
[Redial Interval]
Specify the interval between redial attempts.
[Interval Timer]
Specify the interval between re-send attempts.
[Dial Type]
Select the dialing type.
[PB]
Uses tone dialing.
[DP (10pps)]
Uses pulse dialing with 10 pulses per second.
[DP (20pps)]
Uses pulse dialing with 20 pulses per second.
[Prefix Dial]
Specify a prefix dial number. This number is dialed preceding any dial number. This is useful in telephone
networks using Private Branch Exchange (PBX).
[Cover Sheet]
Specify whether to attach a cover page to faxes. The cover page is attached to the first page of the outgoing fax
as the cover. The cover page contains the recipient, sender name, fax number of the machine, number of pages,
and date and time of sending.
[Send Header]
Specify whether to add the sender information. On the top of the outgoing fax, sender information is added
containing the date, start time of communication, sender name, recipient name, sender ID, and number of
pages.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
