User Guide
378
The printout contains
white areas, or white or
colored stripes.
The paper is damp. Replace the paper with new paper.
The paper is unsuitable. Load the correct type of paper.
The entire printout is
faint.
When using Tray 5 (bypass) to
print, the paper size specified in
the print driver does not match
the type and size of the paper
actually loaded.
Load the correct size and type paper in Tray 5 (bypass).
Refer
• For details, see "Loading Print Media in Tray 5
(Bypass) (P.69)."
Multiple sheets of paper are fed
through the machine at once.
Flex and fan the paper well, and then load it again.
The paper is wrinkled. The paper is unsuitable. Load the correct type of paper.
Paper has been added to the
paper loaded.
Replace the paper with new paper.
The paper is damp.
Text is blurry. The paper is unsuitable. Replace the paper with new paper.
Paper has been added to the
paper loaded.
The paper is damp.
White or color patches
appear vertically.
The drum cartridge has
deteriorated or been damaged.
The drum cartridge needs to be replaced with a new one. For
more information, contact your local Fuji Xerox representative.
No toner is left in the toner
cartridge.
Replace the toner cartridge with a new one.
Refer
• For details, see "Replacing the Toner Cartridges
(P.347)."
Problem Possible Cause Action
To Next Page
Loading...
