Printing Basics 171
Printer Settings
You can select menu items and corresponding values from the operator panel.
When you first browse through the menus from the operator panel, you see a list of menu items. The values
displayed on the right of each menu item are the factory default and original system settings.
NOTE:
• Factory defaults may vary for different regions.
When you select a new value from the operator panel, the value selected is highlighted and is displayed on the right
of the menu item in the previous screen to identify it as the current user setting.
These settings are active until new ones are selected or the factory defaults are restored.
To select a new value as a setting:
1 Press the (System) button.
2 Select the Tools tab, and then select the desired menu.
3 Select the desired menu and menu item.
• If the selection is a menu, the menu is opened and the list of menu items appears.
• If the selection is a menu item, the list of setting values appears. (The current user setting is highlighted.)
A value can be:
• A phrase or word to describe a setting
• A numerical value that can be changed
• An On or Off setting
4 Select the desired value.
The selected value is highlighted.
NOTE:
• Some menu items require you to use the screen keyboard or the number pad to enter the value.
5 Select OK.
6 Select the button to return to the previous menu.
To continue setting other items, select the desired menu. To quit setting new values, select the button.
Driver settings may have precedence over the settings made on the operator panel.
To Next Page
Loading...
Need help?
General
