Faxing 251
Setting the Printer ID
In most regions, you are required by law to indicate your fax number on any fax you send. The printer ID, containing
your telephone number and name or company name, will be printed at the top of each page sent from your printer.
1 Press the (System) button.
2 Select the Tools tab, and then select Admin Settings.
3 Select Fax Settings.
4 Select Fax Line Settings.
5 Select Fax Number.
6 Enter your fax number using the number pad.
NOTE:
• If you make a mistake while entering numbers,
press the
C
(
Clear
)
button to
delete the last digit.
7 Select OK when the number on the display is correct.
8 Select Company Name, and then select OK.
9 Enter your name or company name using the keyboard.
10 Select OK when the name on the display is correct.
To return to the top level of the System menu, press the CA (Clear All) button.
Setting the Time and Date
NOTE:
• It may be necessary to reset the correct time and date if loss of power to the printer occurs.
To set the time and date:
1 Press the (System) button.
2 Select the Tools tab, and then select Admin Settings.
3 Select System Settings.
4 Select General.
5 Select Date & Time.
6 Select Time Zone.
7 Select the desired time zone, and then select OK.
8 Select Date.
9 Enter the correct date using the number pad, or select the correct date using the or button.
NOTE:
• If you make a mistake while entering numbers, press the C (Clear) button to delete the last digit.
10 Select OK when the date on the display is correct.
11 Select Time.
12 Enter the correct time using the number pad.
13 Select OK when the time on the display is correct.
To return to the top level of the System menu, press the CA (Clear All) button.
To Next Page
Loading...
