Using the Operator Panel Menus and Keypad 311
Report 2 Sided Print
Purpose:
To specify to print reports on both sides a sheet of paper.
Values:
Auditron Mode
Purpose:
To specify whether to limit the functions that can be used per user by Auditron authentication.
Values:
No Account User Print
Purpose:
To specify whether to permit the printing of data without authentication information.
Values:
Maintenance
Use the Maintenance menu to initialize the NV (non-volatile) memory, configure the plain paper quality adjustment
settings, and configure the security settings.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Adjust Paper Type
Purpose:
To specify paper density settings.
Values:
1 Sided Prints reports on one side of a sheet of paper.
2 Sided
*
Prints reports on both side of a sheet of paper.
Off
*
Does not limit functions by Auditron authentication.
On Limits functions by Auditron authentication.
Off
*
Does not permit non-account user to print the data.
On Permits non-account user to print the data.
Plain Lightweight
Heavyweight
*
Labels Lightweight
Heavyweight
*
To Next Page
Loading...
Need help?
General
