Fuji Xerox DocuPrint CM405 df User Manual

Maintenance 433
Removing the Fusing Unit
1 Turn off the printer, and wait for 30 minutes.
IMPORTANT:
• If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer
is turned off.
2 Push down the latch to open the rear cover.
3 Grasp the grips on both sides of the fusing unit with the lever under the left side grip squeezed, and then pull
out the unit.

Fuji Xerox DocuPrint CM405 df Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM405 df
Category	All in One Printer
Language	English