To Next Page

To Previous Page

Troubleshooting 369

Print Quality Problems

This section includes:

• "The Output Is Too Light" on page 370

• "Toner Smears or Print Comes Off" on page 371

• "Random Spots/Blurred Images" on page 372

• "The Entire Output Is Blank" on page 373

• "Streaks Appear on the Output" on page 374

• "Part or the Entire Output Is Black" on page 374

• "Pitched Color Dots" on page 375

• "Vertical Blanks" on page 376

• "Mottle" on page 376

• "Ghosting" on page 377

• "Light-Induced Fatigue" on page 377

• "Fog" on page 378

• "Bead-Carry-Out (BCO)" on page 378

• "Jagged Characters" on page 379

• "Banding" on page 380

• "Auger Mark" on page 380

• "Wrinkled/Stained Paper" on page 381

• "Damage on the Leading Edge of Paper" on page 382

• "The Top and Side Margins Are Incorrect" on page 382

• "Color Registration Is out of Alignment" on page 383

• "Protrudent/Bumpy Paper" on page 383

• "Images Are Skewed" on page 384

NOTE:

• In this section, some procedures use the operator panel, CentreWare Internet Services or PCL 6 driver.

Fuji Xerox DocuPrint CM405 df User Manual

Questions and Answers: