198 Copying
Reduce / Enlarge
To reduce or enlarge the size of a copied image from 25 to 400% when you copy original documents from the
document glass or the DADF.
NOTE:
• When you make a reduced copy, black lines may appear at the bottom of your copy.
1 Select the Output tab, and then select Reduce / Enlarge.
2 Select the desired setting, and then select OK.
• mm series
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• inch series
NOTE:
• You can also specify the value in increments of 1% from 25 to 400 by selecting
or or
entering a value using the
number pad. See the following table for specific zoom ratios.
The method to load print media depends on the size and orientation of a print media, see "Loading Print Media
in the Standard 550 Sheet Tray and the Optional 550 Sheet Feeder" on page 144 or "Loading Print Media in the
Bypass Tray" on page 147.
For print media that can be loaded, see "About Print Media" on page 136.
200%
141% A5 → A4
122% A5 → B5
100%*
81% B5 → A5
70% A4 → A5
50%
200%
154%
129% 8.5 x 11" → 8.5 x 14"
100%*
78% 8.5 x 14" → 8.5 x 11"
64%
50%
Copy
Original
A5 B5 A4
A5 100% 122% 141%
B5 81% 100% 115%
A4 70% 86% 100%
To Next Page
Loading...
Need help?
General
