312 Using the Operator Panel Menus and Keypad
• Adjust Transfer Belt Unit
Purpose:
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the previous page, or a part
of the page currently printing.)
Values:
• Adjust 2nd BTR
Purpose:
To specify the transfer roller voltage adjustment for each paper type.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Values:
K Offset 0
*
If faint black colored ghosts appear, try to decrease the value.
-5 to +5
YMC Offset 0
*
If faint ghosts in color (yellow, magenta, or cyan) appear, try to
decrease the value.
-5 to +5
Plain 0
*
-5 to +10
Lightweight Cardstock 0
*
-5 to +10
Heavyweight Cardstock 0
*
-5 to +10
Light Glossy Cardstock 0
*
-5 to +10
Heavy Glossy
Cardstock
0
*
-5 to +10
Labels 0
*
-5 to +10
Envelope 0
*
-5 to +10
To Next Page
Loading...
Need help?
General
