Using the Operator Panel Menus and Keypad 315
• Reset Transfer Unit
Purpose:
To initialize the life counter of the transfer unit. After replacing the transfer unit, be sure to initialize its life counter.
Value:
• Clear Storage
NOTE:
• Clear Storage feature is available only when the optional 512MB memory or the hard disk unit is installed.
Purpose:
To clear all files stored as Secure Print and Sample Print in the RAM Disk or the hard disk unit.
Values:
• Format Hard Disk
NOTE:
• Format Hard Disk feature is available only when the hard disk unit is installed.
Purpose:
To initialize the hard disk unit.
• Non-Genuine Toner
Purpose:
To use toner cartridge of another manufacturer.
NOTE:
• Using a non-Fuji Xerox toner cartridge may severely damage your printer. The warranty does not cover damages caused by
using non-Fuji Xerox toner cartridges.
Values:
Initialize Initializes the transfer unit counter.
All Deletes all files stored as Secure Print and Sample Print in the RAM Disk or the hard disk
unit.
Secure Print Deletes all files stored as Secure Print in the RAM Disk or the hard disk unit.
Sample Print Deletes all files stored as Sample Print in the RAM Disk or the hard disk unit.
Off
*
Does not use toner cartridge of another manufacturer.
On Uses toner cartridge of another manufacturer.
To Next Page
Loading...
Need help?
General
