To Next Page

To Previous Page

434 Maintenance

Installing a Fusing Unit

1 Unpack a new fusing unit.

2 Remove the packing material from the fusing unit.

3 Make sure that the two tabs of the fusing unit align with the grooves on the printer, and then insert it into the

printer until it clicks.

NOTE:

• Hold both sides of the fusing unit with your hands.

• Make sure that the fusing unit is firmly set in the slots and cannot be moved easily.

4 Close the rear cover.

5 Reconnect the power cord to the power connector and turn on the printer.

Fuji Xerox DocuPrint CM405 df User Manual

Questions and Answers: