Using the Operator Panel Menus and Keypad 309
Job Timeout
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is cancelled if the
time-out time is exceeded.
Values:
• Output Settings
Purpose:
To configure settings concerning output from the printer.
Default Paper Size
Purpose:
To specify the default paper size.
Values:
*1
The default for Default Paper Size varies depending on region-specific factory default.
Print ID
Purpose:
To specify a location where the user ID is printed.
Values:
NOTE:
• When you print on DL size paper, a part of the user ID may not be printed correctly.
Print Text
Purpose:
To specify whether the printer outputs PDL data, which is not supported by the printer, as text when the printer
receives it. Text data is printed on A4 or Letter size paper.
Values:
Off Disables the job time-out.
On
*
30 sec
*
Sets the time the printer waits for data to arrive from the computer.
5-300 sec
A4
*1
Letter
*1
Off
*
Does not print the user ID.
Top Left Prints the user ID on the top left of the page.
Top Right Prints the user ID on the top right of the page.
Bottom Left Prints the user ID on the bottom left of the page.
Bottom Right Prints the user ID on the bottom right of the page.
Off Does not print the received data.
On
*
Prints the received data as text data.
To Next Page
Loading...
Need help?
General
