Using the Operator Panel Menus and Keypad 319
• Display Network Information
Purpose:
To show or hide network information in the message field of the
Main Home screen.
Values:
• Data Encryption
Purpose:
To disable or enable data encryption when using the printer.
Values:
• HDD Overwrite
NOTE:
• HDD Overwrite feature is available only when the hard disk unit is installed.
• Overwrite of the hard disk may take several hours. When overwriting the hard disk unit, all functions of the printer are
inoperable.
Purpose:
To erase the contents of the entire hard disk unit by overwriting the hard disk unit with meaningless data.
Values:
• Login Attempts
NOTE:
• Login Attempts feature is available only when Panel Lock Set is set to Enable.
Purpose:
To specify the number of error entry attempts allowed when you log in as an administrator in the Admin Settings
and Report / List menu.
Values:
Show IPv4 Address
*
Shows the IPv4 address of the printer on the Main Home screen.
Show Host Name Shows the host name of the printer on the Main Home screen.
Hide Network Information Does not show network information on the Main Home screen.
Encryption Off
*
Disables encryption of the data.
On Enables encryption of the data.
Encryption Key Sets a key that is required for encryption.
Off
*
Disables overwrite of the hard disk unit.
1 Time Overwrites the hard disk unit once.
3 Times Overwrites the hard disk unit three times.
Off
*
Does not allow an administrator to log in after one error entry attempt.
On 5
*
Sets the number of error entry attempts allowed when an administrator logs in.
1-10
To Next Page
Loading...
Need help?
General
