372 Troubleshooting
Random Spots/Blurred Images
Problem Action
The printed result has random
spots or is blurred.
Ensure that the toner cartridges are installed correctly.
See also:
• "Installing a Toner Cartridge" on page 424
If the problem persists, ensure that the drum cartridges are installed correctly.
Ensure that the drum cartridges are installed correctly.
See also:
• "Replacing the Drum Cartridges" on page 426
• "Installing the Drum Cartridges" on page 429
If the problem persists, replace the drum cartridges if you have spare cartridges.
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 426
• "Installing the Drum Cartridges" on page 429
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.