Using the Operator Panel Menus and Keypad 303
Modem Speed
Purpose:
To adjust the fax modem speed when a fax transmission or reception error occurs.
Values:
Display Manual Fax Recipients
Purpose:
To set whether to display the fax number of the recipient on the sending fax screen when manually sending a fax.
Values:
• Fax Reports
Purpose:
To configure settings for fax reports.
Fax Activity
Purpose:
To set whether to automatically print a fax activity report after every 50 incoming and outgoing fax communications.
Values:
Fax Transmit
Purpose:
To set whether to print a transmission result after a fax transmission.
Values:
Fax Broadcast
Purpose:
To set whether to print a transmission result after a fax transmission to multiple destinations.
Values:
2.4 Kbps
4.8 Kbps
9.6 Kbps
14.4 Kbps
33.6 Kbps
*
Off Does not display the fax number when manually sending a fax.
On
*
Displays the fax number when manually sending a fax.
Auto Print
*
Automatically prints a fax activity report after every 50 incoming and outgoing fax
communications.
No Auto Print Does not automatically print a fax activity report after every 50 incoming and
outgoing fax communications.
Print Always Prints a transmission report after every fax transmission.
Print On Error
*
Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission.
Print Always
*
Prints a broadcast report after every fax broadcast.
Print On Error Prints a broadcast report only when an error occurs.
Print Disable Does not print a broadcast report after a fax broadcast to multiple destinations.
To Next Page
Loading...
