Using the Operator Panel Menus and Keypad 287
• Output Color
Purpose:
To specify the color mode to Color or Black and White. This setting is used for a print job that does not specify a print
mode.
Values:
• Ignore Form Feed
Purpose:
To specify whether to ignore blank pages that only contain Form Feed control codes.
Values:
PostScript Settings
Use the PostScript Settings menu to change printer settings that only affect jobs using the PostScript
®
emulation printer language.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• PS Error Report
Purpose:
To specify whether to print the contents of PostScript errors.
The change becomes effective after the printer is turned off and then on again.
Values:
NOTE:
• Instructions from the PS driver override the settings specified on the operator panel.
• PS Job Time-out
Purpose:
To specify the runtime of one PostScript job.The change becomes effective after the printer is turned off and then on
again.
Values:
Black and White
*
Prints in the black and white mode.
Color Prints in the color mode.
Off
*
Disables the Ignore Form Feed feature.
On Enables the Ignore Form Feed feature.
Off Discards the print job without printing an error message.
On* Prints an error message before it discards the job.
Off* Job time-out does not occur.
On 1 A PostScript error occurs if processing is not completed after the specified
time.
1-900min
To Next Page
Loading...
Need help?
General
